Experience

  • Design of Lighting System Bodega de Azúcar 2, Ingenio Tala (2017).
  • Steam System Engineering Calderas-Molinos-Batey and Electric Power Plant for pipe modification, Ingenio Plan de Ayala (2016).
  • Design and Electromechanical Engineering for Electrification of Mills 1 and 6, including planetary gearboxes, Ingenio Plan de Ayala (2016).
  • Design and engineering for Batey Ingenio Pánuco electrification, 800HP, 3300HP and 6700 HP engines (2016).
  • Architectural, civil, electromechanical design and control for the assembly and installations of 1000kW motor generator Ingenio Tala, Tala, Jal (2016).
  • Short circuit study for Cummins ESB, 7.5MW Cogeneration project in Planta Herdez, SLP (2016).
  • Short circuit study and Power flow study for Ingenio Plan de Ayala (2016).
  • Preparation of documentation for review of UVIE for approval of permits in TRE project, Grupo Pantaleon, 2016.
  • Design of the distribution system for the TRE cogeneration project, Pánuco, Ver (2015)
  • Short circuit study, load flow analysis and coordination of protections, CIASA (Coatotolapam), 2014.
  • Design of Variable Speed Drives for control of fan motors and water pump in Low Pressure Boilers, Tala Sugar Mill, 2014.
  • Design of quarter of variators for electrification of Mill 3, Ingenio Tala, 2014.
  • Reengineering of the Electrical Distribution System of Ingenio Pánuco for milling increase up to 8 thousand TC 2013-2014
  • Re-engineering for the distribution and equipment adjustment system of Ingenio Bellavista SA de CV Electric Power Plant (2014)
  • 5000 amp retrofit design includes switch, copper bus modification, control, etc. Ingenio José Ma. Morelos, Casimiro Castillo, Jal. 2015
  • Comprehensive Land System Design (NOM022 and NOM001SEDE, art 250), Ingenio José Ma. Morelos SA, Casimiro Castillo, Jal. 2014.
  • Supply and commissioning of Multilin SR489 protection relay for TG1 of Ingenio José Ma Morelos SA, Casimiro Castillo, Jal.
  • Supply, configuration, testing and commissioning of Multilin SR489 protection relay Ingenio Tala, SA de CV.
  • Heating system design for 200TPH boiler by means of heating resistors, for maintenance of Caldera 200TPH in Tala Electric SA, Tala, Jal.
  • Design of Electrification Mills, includes civil and electromechanical works, Ingenio de Tala SA de CV 2014.
  • Design for the electrification of three boiler fans and one water pump, feeding from Switchgear in 13.8kV, up to motors in 4.16kV, passing through 4.5MVA transformer, Switchgear and VFDs in medium voltage. Includes civil and electromechanical works. Ingenio Tala SA, Tala, Jal. 2013 and 2014.
  • Design of electrical installations to increase grinding capacity from 8 to 10 thousand tons of cane, Ingenio Pánuco, Pánuco, See 2013.
  • Design of electrical, mechanical and control installations for the 10MW turbo generator assembly, Ingenio Plan de Ayala SA, Cd. Valles, SLP, 2013.
  • Design of electrical, mechanical and control installations for the 6MW turbo generator assembly, Ingenio Bellavista SA, Bellavista, Jal.
  • Study of Flexibility of steam pipes for TG 10MW, Ingenio Plan de Ayala, Cd. Valles, SLP, March 2013.
  • Flexibility study of steam pipes for TG 13MW, Ingenio El Higo, El Higo, Ver. (March 2013.)
  • Flexibility study of steam pipes for TG 6MG, Ingenio Bellavista, Bellavista, Jal. (January 2013)
  • Comprehensive land system design, includes protection for atmospheric discharges and vessels that produce static electricity (lightning rods, land, NOM022 and ART 250 NOM001SEDE), Ingenio El Higo, SA, El Higo, Ver.
  • Energy Quality Study and Short Circuit Study for Ingenio Lázaro Cárdenas, Taretan, Mich. (May 2012)
  • Design and construction of land systems for: 15kVA main substation, quarter of VFDs for mills, Ingenio El Higo, El Higo, Ver.
  • Study of short circuit and coordination of protections for Ingenio El Dorado, El Dorado, Sin. (April 2012)
  • Design of the distribution system for the 25MW Cogeneration Project for Tala Electric (Tala Ingenuity), including electrical design for boiler equipment of 65 kg/m2 (May-December-2011).
  • Civil and electrical design Substation Water Treatment Plant, Ingenio Tala SA de CV (2011)
  • Civil, mechanical and electrical design of Compressor Room 25MW Tala Electric cogeneration project (2011).
  • Engineering and Design of the control board of the Turbogenerator 2 Ingenio San Francisco Ameca, Ameca, Jal. (2011)
  • Audit to the Electric Distribution System vs. NOM / NEC for the Ingenio San Fco. Ameca, Ameca, Jal.
  • Short circuit study, coordination of protections and load flow analysis for Ingenio San Francisco Ameca, Ameca, Jal.
  • Short circuit study, coordination of protections and load flow analysis for the Lázaro Cárdenas, Taretan, Mich.
  • Short circuit study, coordination of protections and load flow analysis for Ingenio José Ma Martínez, Tala, Jal.
  • Design for the installation of an automatic synchronization system and modifications to the electrical distribution system of Ingenio Plan de Ayala, Cd. Valles, SLP.

■ Electrification of 2 1500 HP 3f/60Hz/4.16kV mills (switch, including the manufacture of Switchgear MetalEnclosed in 5kV, in Ingenio Plan de Ayala, Cd. Valles, SLP. 2016
■ Electrical installation of 2 centrifuges of 1800kg, Ingenio Plan de Ayala, Cd. Valles, SLP. 2016
■ Assembly and Electrification of 3 mills with 1500HP 3f/60Hz/480V motors, including installation of switch, motor, VFD, at Ingenio Pánuco, Grupo Pantaleón, 2016
■ Batey Mounting and Electrification includes 6700HP 3f/60Hz/13.8kV Swingback motor, 3300HP 3f/60Hz/13.8kV blade motor and 800HP 3f/60Hz/4.16kV pre-blade motor, 2016.
■ Supply and installation of 10 retrofits of power switches from 1200 to 4000 amp 3f/60Hz/480V, Ingenio Plan de Ayala, Cd. Valles, SLP, 2016.
■ Installation of Emergency Diesel Plant 1000kW, including civil work, electromechanics and control, Tala Electric, 2016.
■ Electrification project TRE (Ingenio Pánuco), includes assembly of 40MW turbogenerator, assembly of electrical distribution equipment: substations, MCCs, ducts, wiring, lighting system and contacts. (2015-2016)
■ Electrification works at Ingenio Bellavista, Bellavista Jal (2015): 350HP centrifuge, earth systems, others.
■ Electrostatic Precipitator Electrification Ingenio Pánuco, 2015.
■ Updating of protection schemes of CIASA Power Plant (Coatotolapam Sugar Mill), placing SEL-700G relays and switches in the main panel for protection of turbogenerators. 2015
■ Electrification of 2 Mills 750HP, including assembly of electrical equipment, piping and wiring. CIASA, 2014.
■ Manufacture and installation of low voltage switchboard, and modification of electrical distribution system Ingenio Bellavista, 2014
■ Capacitor bank installation 2700 kVAr 3f/60Hz/4.16kv, Ingenio Tala SA de CV, Tala, Jalisco. 2014
■ Installation of levelling plates for new reduction gears of Molino, Ingenio Tala SA, Tala, Jal. 2014
■ Medium Voltage electrical installation and measurement of the 3MW Turbogenerator Technocommerz-Kato, Ingenio San Francisco Ameca, Ameca, Jal.
2014
■ Electrification of Molino 1 at Ingenio San Francisco Ameca, included assembly of a 1000kVA substation, piping and wiring, assembly of 5kV Switchgear at Power Plant, configuration of measurement and protection devices, 2014.
■ Mounting base construction for 3MW 3f/60Hz/4.16kV turbogenerator Ingenio San Francisco Ameca, Ameca, Jal. 2014.
■ Expansion of the power plant building, San Francisco Ameca Sugar Mill, Ameca, Jal. 2014
■ Supply, assembly, installation and commissioning of 1000kW 3f/60Hz/480V diesel generator at GASER balloon factory, San Gabriel, Jal. 2014
■ Civil work, and Electromechanical assembly of Motor and VFD 1500 HP for Molino 3 TA, Ingenio Tala SA, Tala, Jal. 2014
■ Retrofit of 2 switches of 5000 amp 3f/60Hz/480V, Ingenio José Ma. Morelos SA, Casimiro Castillo, Jal. 2014
■ Assembly, alignment and commissioning of TG 10 MW, Ingenio Plan de Ayala, Cd. Valles, SLP March-May 2013
■ Connection of TR-1000kVA at PTAR- El Ahogado (January 2013). Work done for Megamak.
■ Turnkey project for assembly and installation of TG 6MW, Ingenio Bellavista, Bellavista, Jal. (Dec. 2012 – Feb. 2013)
■ Electromechanical installation (canalizations, wiring, diesel pipes and accessories) of 20 Cummins motor generators in Cementera TPM, Actopan, Hgo. Work done for Cummins.
■ Turnkey Project Water Treatment Plant Substation, Ingenio Tala SA de CV
■ Electrification of 200 Ton-hr steam boiler Caldema brand, for 25MW Tala Electric Cogeneration project. It includes design and construction of electrical room of CCMs, installation of protection boards, VFDs in Medium Voltage, Distribution in Medium and Low Voltage, installation of Power Transformer 4.5 MVA and 2.5MVA, 7 isolation transformers of the VFDs, Lighting and services. This has been the largest project designed and executed by ASE (June 2011- Feb-2012).
■ Civil, mechanical and electrical works Compressor Room (3 compressors 50HP Gardner Denver and auxiliary equipment),Tala Electric, 2011.
■ Manufacture of Operation Stalls based on Multipanel, Ingenio Tala (2011).
■ Mechanical and electrical work Cooling Tower 25MW Cogeneration Project Tala Electric (2011-2012)
■ Assembly of 6 condensate pumps, pipes and accessories including civil and mechanical works ,Ingenio de Tala SA de CV
■ Main board update of Turbogenerator No.2 3MW@4.16kV of Ingenio San Francisco Ameca SA de CV
■ Link between 4.16kV and 440V bus through a 3.75MVA substation, Ingenio Plan de Ayala, Cd.
■ Installation of temperature measurement and process control system for the turbogenerators of the José Ma Morelos Power Plant, Casimiro Castillo, Jal.
■ Development and supply of an automatic synchronisation system for
*** Translated with www.DeepL.com/Translator (free version) ***

■ Maintenance of instrumentation and control equipment, Ingenio Tala SA de CV, 2015
■ Maintenance 78 motors from 5 HP to 1200 HP for Tala Electric SA, Tala, Jal. 2013
■ CPI Ingredients protection relay tests, Guadalajara, Jal. 2012.
■ Operation 24-7 of Turbogenerator and Boiler Cogeneration Project 25MW Tala Electric, 2012.
■ Operation 5×1000 kW Cummins motor generator array for Nestlé, 2012
■ Maintenance and testing of medium voltage protection board Ingenio Lázaro Cárdenas, Taretan, Mich.
■ Land systems maintenance Ingenio José Ma Morelos, Casimiro Castillo
■ Maintenance to generator components 3000kW 3f/60Hz/4.16kV Ingenio San Fco Ameca, Ameca, Jal.
■ Corrective Campari deep well pump starter (Tequila Espolón), Arandas, Jal.
■ Maintenance of substations, switches and relay tests of the Omnilife Distribution System (for Schneider Electric, since 2007)
■ Maintenance and testing of protection relays as well as labor support for the mtto to substations and boards of Cervecería Cuauhtémoc Moctezuma, Guadalajara, Jal. (work done for Schneider Electric).
■ Intel Electric Distribution System Relay Testing (for DAPAESA, December 2009, Sept 2010)
■ Maintenance and repair, configuration and testing of digital protection relays for Multilin SR489 generators, Ingenio José Ma. Morelos, Casimiro Castillo, Jal.
■ Exciter repair for emergency diesel generator, IJMaMorelos, Casimiro Castillo
■ Maintenance of substations, switches and relay tests of the Cervecería Cuauhtemoc Moctezuma Electrical Distribution System, Guad. Jal. (For Schneider Electric since 2004)
■ Maintenance and testing of 28 FPE H-3 switches Ingenio de Atencingo, Atencingo, Puebla.